dc/dc converters tmdc 40 series, 40 watt features fully encapsulated low profle plastic case ultra wide 4 : 1 input voltage range operating temperature range C40c to +85c i/o isolation 2500 vdc excellent effciency up to 92 % input flter to meet en 55032, class a optional din-rail mount adapter no minimum load required power good led indicator remote on/off 3-year product warranty the tmdc 40 series is a range of encapsulated high performance dc/dc con - verter modules. with a very high effciency of up to 92% and the use of highest reliable components these 40 w converters are avialable as a chassis-mount with screw terminlas or pcb versions. the 8 models have a wide 4:1 input voltage range and a tight output voltage regulation. they do not need a minimum load and offer a high effciency also at low load conditions. they feature a remote control input and a green power good led which indicates the presence of the output voltage. protection against overload and short circuit are standard features of these convert - ers. emc characteristics and safety certifcations are aligned for the operation in industrial environment. order code input voltage range output voltage output current max. effciency tmdc 40-2411 5.1 vdc 8000 ma 90 % tmdc 40-2412 9 C 36 vdc 12 vdc 3330 ma 90 % tmdc 40-2415 (nominal 24 vdc) 24 vdc 1670 ma 90 % tmdc 40-2418 48 vdc 835 ma 89 % tmdc 40-4811 5.1 vdc 8000 ma 89 % tmdc 40-4812 18 C 75 vdc 12 vdc 3330 ma 91 % tmdc 40-4815 (nominal 48 vdc) 24 vdc 1670 ma 92 % tmdc 40-4818 48 vdc 835 ma 90 % models page 1 of 4 c b scheme http://www.tracopower.com
dc/dc converters tmdc 40 series 40 watt input specifications input current at no load (nominal input voltage) 24 vin models: 90 ma typ 48 vin models: 55 ma typ. surge voltage (100 msec. max.) 24 vin models: 50 v max. 48 vin models: 100 v max. start up time 30 ms max. start-up voltage 24 vin models: 9 vdc max. 48 vin models: 18 vdc max. under voltage shut down 24 vin models: 7.5 vdc typ. 48 vin models: 16 vdc typ. emi conducted en 55032 class a, fcc part 15 class a without external components emi radiated en 55032 class a, fcc part 15 class a with external components emc immunity en 55024 C esd (electrostatic discharge) en 61000-4-2, air 8 kv, contact 4 kv, perf. criteria a C radiated immunity en 61000-4-3, 10 v/m, perf. criteria a C fast transient / surge en 61000-4-4, 2 kv, perf. criteria a en 61000-4-5, 2 kv , perf. criteria a C conducted immunity en 61000-4-6, 10 vrms, perf. criteria a C magnetic field immunity en 61000-4-8, 30 a/m, perf. criteria a output specifications voltage set accuracy 2.0 % max. regulation C input variation vin min. to vin max. 0.5 % max. C load variation 0 C 100 % 1.0 % max. minimum load not required temperature coefficient 0.02 %/k ripple and noise (20 mhz bandwidth) 5.1 vdc models: 100 mvpk-pk. typ. 12 & 24 vdc models: 150 mvpk-pk typ. 48 vdc models: 200 mvpk-pk. typ. transient response (alignment to 1% at load step change 75% to 100% ) C recovery time 250 s typ. C deviation 5 % max. over voltage protection 120 % of vout (zener diode clamp) output current limitation at 150% of iout max. short circuit protection hiccup mode, automatic recovery capacitive load 5.1 vdc models: 13600 f max. 12.0 vdc models: 2400 f max. 24.0 vdc models: 600 f max. 48.0 vdc models: 150 f max. all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated. page 2 of 4 http://www.tracopower.com
dc/dc converters tmdc 40 series 40 watt all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated. page 3 of 4 general specifications temperature ranges C operating (natural convection 20 lfm) C40c to +85c (with derating) C iec/en/ul60950-1 approved ambient +65c max. (without derating) C case temperature +95c max. C storage C50c to +125c load derating C natural convection 20 lfm 4.5 %/k above 73c thermal impedance C natural convection 20 lfm 4.75 c/w humidity (non condensing) 95 % rel h max. reliability, calculated mtbf (mil-hdbk-217f, at +25c, ground benign) >644290 h isolation voltage (60 sec.) C input/output 2500 vdc isolation capacitance C input/output 2400 pf max. (100 khz, 1 v) isolation resistance C input/output >1000 mohm (500 vdc) altitude during operation 2000 m max. switching frequency 285 khz typ. remote on/off C on: 3.5 to 12 vdc to -vin or open circuit. C off: 0 to +1.2 vdc or short circuit to -vin C off idle current: 3 ma typ. safety standards C cb test report ul/cul 60950-1 2nd edition, iec 60950-1:2005 (2nd edition)+am1:2009 +am2:2013, en 60950-1:2006+a11:2009+a1: 2010 +a12:2011+a2:2013 C ul test certificat ul/cul 60950-1 2nd edition, csa c22.2 no. 60950-1-07, 2nd ed. C certification documents www.tracopower.com/overview/tmdc40 physical specifications casing material plastic resin (ul 94v-0 rated) weight 162 g (5.7 oz) environmental compliance C reach declaration www.tracopower.com/overview/tmdc40 C rohs directive 2011/65/eu http://www.tracopower.com
sp ec i?cati ons can be changed wi thout noti ce! make sure you are using the latest documentation, downloadable at www.tracopower. com www .tracopower. com dc/dc converters tmdc 40 series 40 watt outline dimensions rev. march 09. 2018 page 4 of 4 pin single 1 remote on/off 2 Cvin (gnd) 3 +vin (vcc) 4 +vout 5 nc 6 Cvout 7 nc 8 nc pin-out order code: tmp-mk2 weight: 59 g (2.08 o) without converter din-rail mount adapter (optional) dimensions in [mm], () = inch terminals: wires 1.5mm 2 max. recommended tightening torque: 0.5 to 0.7 nm (4.5 to 6.2 lb.in.) case tolerances: 0.25 (0.01) 92.0 (3.62 ) 100.0 (3.94) 112.0 (4.41) 63 .8 (2 .5 1) 5 0. 0 (1 .9 7) top view 10.0 (0.39 ) 5. 0 (0 .2 0) 16 .8 (0 .6 6) 25 .6 (1 .0 1) 4 x 3.5 dc - on 1 2 4 5 6 7 8 3 p ower good led
|
